top of page
News & cases
Search


Online Partial Discharge testing av en 10 MVA, 6.6 kV synkron generator
Oppdage isolasjonsfeil før de utvikler seg til havarier Partial Discharge (PD)-overvåking er et av de mest effektive diagnostiske verktøyene for å vurdere tilstanden til høyspente roterende maskiner. Nylig ble det utført en online PD-vurdering på en 10 MVA, 6,6 kV synkrongenerator, som ga verdifull innsikt i tilstanden til statorisolasjonssystemet mens maskinen fortsatt var i drift. HV Rotating Machines Hvorfor utføre online PD-testing? Nedbrytning av statorisolasjonen er en


Dynamic Cable Rating with DTS
The need for grid capacity is increasing rapidly due to electrification, industrial development and the connection of new renewable energy. At the same time, building new cable facilities is often both costly and time-consuming. Therefore, it is becoming increasingly important to utilize the capacity of existing infrastructure in the best possible way. Many cable systems today are operated based on conservative assumptions about environmental conditions, soil properties and l


SAT power transformer 66-420 kV
NEKA offers Site Acceptance Testing (SAT) and diagnostics of power transformers and bushings from 66 kV to 420 kV. The tests verify that the transformer has been transported, installed and commissioned without damage or deviations, and that it meets applicable specifications before energizing. Through comprehensive electrical tests, any faults in windings, insulation systems, tap changers or mechanical structure can be detected at an early stage. This contributes to increased


Distributed Temperature Sensing (DTS)
Neka supplies advanced DTS systems that use fiber optic sensors for continuous temperature measurement over long distances. We offer both temporary measurement campaigns and permanent installations, including equipment, installation, configuration and technical advice. Delivery of DTS equipment Temporary DTS installations Permanent DTS installations Dynamic Cable Rating (DCR) Load and temperature mapping Commissioning and configuration Analysis and reporting of measurement da


Verification and testing of high-voltage infrastructure for data centers
Neka is a leading provider of testing, diagnostics and verification of high-voltage infrastructure for data centers. We assist developers, EPC contractors and end customers in documenting that all electrical systems meet project requirements, relevant standards and requirements for safe operation.


Online Partial Discharge Testing of a 10 MVA, 6.6 kV Synchronous Generator
Detecting Insulation Defects Before They Become Failures Partial Discharge (PD) monitoring is one of the most effective diagnostic tools for assessing the condition of high-voltage rotating machines. Recently, an online PD assessment was performed on a 10 MVA, 6.6 kV synchronous generator, providing valuable insight into the health of the stator insulation system while the machine remained in service. HV Rotating Machines Why Perform Online PD Testing? Stator insulation degra


NEKA Provides Independent Verification of MV and HV Cable Systems for Data Centers
Ensuring Reliability in Critical Infrastructure As data centers continue to grow in scale and power demand, the reliability of electrical infrastructure has never been more important. A single cable failure can lead to costly outages, commissioning delays, and significant operational risk. Independent verification of medium-voltage (MV) and high-voltage (HV) cable systems is therefore a critical step before energization and handover. NEKA delivers independent testing and veri


What is the expected lifespan of a high-voltage cable system?
Hva er forventet levetid til et høyspent kabelanlegg?


Cable diagnosis with TanDelta/loss factor measurement
Kontroll av høyspentkabel. Isolasjonstest med Tandelta avdekker den generelle tilstanden til isolasjonssystemet i høyspentkabler.


Condition assessment of high voltage cable system 66-132 kV with Damped AC (DAC) testing
Tilstandskontroll med restlivsvurdering av høyspent kabelanlegg 66-132 kV
PD måling
TD måling
DTS


Commissoning 145-420 kV cable systems with Damped AC testing
Sluttkontroll 145-420 kV kabelanlegg


Portable DTS system for Dynamic Cable Rating (DCR)
Portabelt DTS system for temperaturovervåkning av høyspentkabler


Maintain network performance and integrity at all times through continuous 24/7 PD monitoring.
Advanced HV Asset Monitoring for Reliable Network Performance Maintaining the health and reliability of high-voltage assets is critical to ensuring safe, efficient, and uninterrupted power delivery. NEKA's continuous monitoring solutions provide real-time visibility into asset condition, enabling early detection of developing faults before they impact network operations. By continuously collecting and analyzing condition monitoring data, our system delivers actionable insight


Power transformer diagnosis 12-420 kV
Power transformer diagnosis 12-420 kV


Keep the factory up and running with online PD testing!
PD testing
PD survey


Remote PD test on cable systems at substations, transformer stations and power stations (6-420 kV)
Online tilstandskontroll av kabelanlegg i nettstasjoner, trafostasjoner og kraftstasjoner (6-420 kV)


Commissioning on 2,2 km subsea cable
22 kV subsea cable rejected during commissioning


Predictive maintenance on high voltage cable systems 6,3-420 kV
Predictive maintenance on high voltage cable systems


Commissioning 145-420 kV cable systems
Sluttkontroll 145-420 kV kabelanlegg


Residual life assessment of MV & HV cable systems
What is the cost of replacing a cable system prematurely? The technical service life of high voltage cables is estimated to be 30 years....


Factory acceptance test (FAT) 22 kV subsea cable
As part of a FAT for a new 22 kV submarine cable, a Damped AC (DAC) high voltage withstandtest was performed. The high voltage test was...


Condition assessment on critical 22 kV high-voltage cables in a Chemical plant
During an Online PD survey, critical PD activity was revealed at one out of 25 outgoing cable circuits. The relevant circuit consisted of...


Non-destructive condition assessment on a 60 kV PILC subsea cable
Ikke destruktiv tilstandskontroll av oljekabel


Commissioning of high-voltage cable systems in wind farms 36-170 kV
Before taking over a new wind farm, a comprehensive commissioning program should be performed to verify that the electrical infrastructure is free from defects that could lead to costly failures, reduced reliability, or potentially hazardous incidents during operation. This requirement should also apply to the high-voltage cable system. In modern wind farms, the cable network often represents a substantial part of the electrical infrastructure, typically consisting of many ki
bottom of page
